ColorBoost+™ From Texas Made DTF Custom DTF Gang Sheet Builder

ColorBoost+™is DTF but BETTER. Traditional DTF is printed in CMYK colors. ColorBoost+™ is printed in CMYK (cyan, magenta, yellow, key (black)) PLUS ORGB (orange, red, green, blue). Boost your prints to the next level. The gamut of colors with 8-color printing is exponentially higher. 

Each print is printed to order. TAT is 3-5 business days. If you are needing your order sooner, we offer a "push me to the front of the line" option as well. Pressing instructions:  - Pre-press shirts for 8-10 seconds to remove moisture - Press transfer for 8-15 seconds at temperature recommended below depending on material setting *Cotton: 300 - 320 degrees F  *Polyester, synthetics and blends: 260 - 275 degrees F  - Cold peel (wait until transfer cools on the shirt before peeling slowly from one corner and ensuring adhesion - Repress for 5 seconds with parchment paper or heavy cotton shirt over design FAQs: Actual product colors MAY vary from mock up photo due to device display capabilities and monitor settings. Every print is different and has different color variations, especially in the watercolor graphics and/or after heat pressing. Please be aware of this before purchase as we DO NOT accept returns or exchanges for our products. We are not responsible for transfers that are pressed incorrectly. Please make sure you are using the correct material, color, and press settings prior to pressing your transfer.